Color Tint

Name: Color Tint | Translucent Paver Tint | sealnlock.com
SKU: CA-1GAL
Price: 65.00 USD
Availability: InStock

$65.00

A concentrated translucent tint designed to restore color to worn, faded brick pavers while allowing the natural variation and character of the surface to remain visible. Available in Red, Brown, Gray and Tan. Supplied in 1-gallon containers.

Available in1-gallon containers

ColorsRed, Brown, Gray and Tan

Maximum loadingUp to 16 oz per gallon of sealer

Works withCompatible Seal ‘n Lock water-based sealers

Find a distributor 813-852-1500

Color Tint is supplied in 1-gallon containers.

SKU CA-1GALCategory AdditivesShips direct from the manufacturer

Concentrated and UV stableA little pigment goes a long way, and the color holds up in the sun.

Blendable colorsRed, Brown, Gray and Tan can be blended to create custom tones for the project.

Direct from the manufacturerWe make it, so you get the person who knows it on the phone.

Additives from Seal ‘n Lock

Bring faded pavers back to life.

A concentrated translucent tint designed to restore color to worn, faded brick pavers while allowing the natural variation and character of the surface to remain visible.

Mix directly into compatible Seal ‘n Lock water-based sealers to refresh existing color or create custom tones. Available in Red, Brown, Gray, and Tan, with colors that can be blended for additional options. Supplied in 1-gallon containers.

Benefits

Concentrated and UV stableWorks with compatible Seal ‘n Lock water-based sealersEasily blend custom tonesAvailable in Red, Brown, Gray and Tan

On the job

How to mix and apply it.

Mix it into the sealer

Add the desired amount of Seal ‘n Lock Color Tint to a compatible water-based sealer and stir with a drill mixer for approximately 1 to 2 minutes, or until completely mixed, prior to application. When adding color to a two-component product such as PRO Max Gloss 2K, thoroughly mix the color with Part A before mixing with Part B as usual.

For the most consistent results, stir lightly and periodically during application to maintain even color distribution, and remix any leftover material with a drill mixer before applying.

Dial in the color

Adjust the amount of tint to control the final appearance, from subtle, translucent color enhancement to stronger color restoration. Use less for a more translucent appearance, or gradually increase the concentration up to 16 ounces per gallon of sealer. Always start with a test area and adjust the tint concentration until the desired color is achieved.

Pro tip

Do not add too much color. Over-pigmenting can contribute to color float, uneven appearance, or streaking, particularly with darker colors.

Control the color. Keep the character.

Test the color first.

Seal ‘n Lock Color Tint gives contractors the ability to refresh faded pavers without automatically covering the natural variation of the surface. Colors can be blended to create custom tones for the project. Always start with a test area and adjust the tint concentration until the desired color is achieved.