PRO-Traction

Name: PRO-Traction | Wet-Surface Traction Additive | sealnlock.com
SKU: NSA-8OZ
Price: 25.00 USD
Availability: InStock

$25.00

A fine polymer traction additive designed to increase wet-surface traction when used with the final coat of compatible Seal ‘n Lock sealer. 16-ounce container.

PurposeIncreased wet-surface traction

Add toThe final sealer coat only

Best forPool decks, walkways, steps

Available in16-ounce containers

Find a distributor 813-852-1500

Category AdditivesShips direct from the manufacturer

Goes in the final coatAdded or broadcast only with the final coat, so it stays effective at the wearing surface.

Works with your equipmentA fine polymer designed to work with the Seal ‘n Lock Pail Pump System per the current Application Guide.

Direct from the manufacturerWe make it, so you get the person who knows it on the phone.

Additives from Seal ’n Lock

A slip-resistant additive for the final coat, where wet traction matters most.

PRO-Traction is a fine polymer traction additive designed to increase wet-surface traction when used with the final coat of compatible Seal ‘n Lock sealer. It is especially useful on pool decks, walkways, steps, and smooth or dense surfaces where additional wet-surface traction is desired.

It can be mixed into or broadcast with the final coat according to the current Application Guide, so it remains effective at the wearing surface. PRO-Traction can improve traction, but no coating or additive can eliminate slip risk. Application rate, surface profile, maintenance and site conditions all affect performance.

Benefits

Increases wet-surface tractionDesigned for the final sealer coatIdeal for pool decks and walkwaysSuits steps and smooth or dense surfacesDesigned to work with the Pail Pump SystemSupplied in 16-ounce containers

Product documentsRead the application guide and data sheets before use.

Application guide (PDF) Technical data sheet (PDF) Safety data sheet (PDF)

On the job

How to apply it.

Read the application guide before you start. Timing matters more than quantity with this product.

Seal as normal, up to the final coat

Apply the flood coat and any intermediate finish coats exactly as the sealer’s own technical data sheet specifies. PRO-Traction plays no part until the last coat.

Add or broadcast with the final coat

Add or broadcast PRO-Traction only with the final coat, so it remains effective at the wearing surface. Added earlier, it ends up buried under sealer and stops doing its job.

Keep it even

Application rate and surface profile both affect performance. Work to a consistent rate across the area so traction does not vary from one section to the next.

Test the completed system

Always test the completed system. Traction depends on the whole build — sealer, additive, surface and maintenance — not the additive alone.

It is not slip-proof

PRO-Traction can improve traction, but no coating system can eliminate slip risk. Application rate, surface profile, maintenance and site conditions all affect performance.

Before you commit the job

Test it on the surface first.

Traction depends on the sealer, the additive rate, the surface profile and how the area is maintained. Build a test section with the same system you intend to install, walk it wet, then commit.